Welcome to our websites!
Junk Mill Type MXP
Junk Mill Type MXP
Junk Mill Type MXP can be divided into three kinds: flat-bottom (or concave-bottom) milling shoe, guide milling shoe and cone milling shoe, according to its structure and shape. At the milling surface, the carbide particles are built up by welding, which plays a part of self-milling. It is used to mill the fallen substances, such as tooth wheel, slipdog, fittings for deep-well pump, etc. with the advantages of anti impact and longer service life.
Specifications
| Model | O.D.
mm(in) |
Connection | Length
mm(in) |
| MXP(A)80C-2A30 | 80(3 1/8) | 2 3/8REG | 300(11 3/4) |
| MXP(A)89C-2A30 | 89(3 1/2) | 2 3/8REG | 500(19 5/8) |
| MXP(A)92C-NC23 | 92(3 5/8) | NC23 | 500(19 5/8) |
| MXP(A)102C-210 | 102(4) | NC31 | 500(19 5/8) |
| MXP(A)108C-2A10 | 108(4 1/4) | NC26 | 500(19 5/8) |
| MXP(A)114C-210 | 114(4 1/2) | NC31 | 500(19 5/8) |
| MXP(A)146C-310 | 146(5 3/4) | NC38 | 500(19 5/8) |
| MXP(A)159C-310 | 159(6 1/4) | NC38 | 500(19 5/8) |
| MXP(A)190C-410 | 190(7 1/2) | NC50 | 500(19 5/8) |
| MXP(A)203C-410 | 203(8) | NC50 | 500(19 5/8) |
| MXP(A)292C-630 | 292(11 1/2) | 6 5/8REG | 500(19 5/8) |
| MXP(A)305C-630 | 305(12) | 6 5/8REG | 500(19 5/8) |
| MXP(A)410C-730 | 410(16 1/8) | 7 5/8REG | 450(17 5/8) |
| MXP(A)425C-630 | 425(16 3/4) | 6 5/8REG | 500(19 5/8) |
Write your message here and send it to us
